How to Setup Your DS-2 Player with the AD+Sign App

Before we begin

Make sure that:

• Your DS-2 Player is connected according to the recommended diagram and ready for use
• Your DS-2 Player is either connected to a wired network or will have access to a wireless network
• The AD+Sign App is downloaded on your mobile device
• Your device has access to the same IP network as the DS-2 will be connected to

Starting Setup

4. Power your connected display or TV and select the correct video input
   • With the DS-2 powered off, you will likely see a 'No Signal' warning on the display - this is normal.
5. Power the DS-2 and wait for the product to fully load, observing the status on your connected display. When ready, the DS-2 will ask you to set up the device using either the AD+Sign app or a mouse and keyboard.

If you are using an Ethernet wired network and you're not using a static IP address, the DS-2’s IP address will be shown.

If you are using WiFi, or the network has no DHCP server, you will see a message indicating that the DS-2 is not connected to the network yet. This is normal.

In the App

1. Start the AD+Sign app and navigate to the 'Players' page.
2. On the Players page, click the Add Player button and choose the Setup New Player option

   

3. Follow the subsequent instructions in the AD+Sign app to complete the setup of the DS-2 Player.

   • You will be prompted to enter a PIN for this Player. This PIN is needed to alter any DS-2 settings from this point forward

   • You will be prompted to enter a Player name to identify the Player in the AD+Sign App

   • Ensure you select the correct Player Mode

     This App - Use the AD+Sign App to deploy content when connected to the same network

     Cloud Connected - Deploy content to the Player using AD+Sign Pro

What's Next?

How will you run your AD+Sign DS-2 Player?